Заказать металлопрокат - Металлсервис

Заказать металлопрокат - Металлсервис
Заказать металлопрокат, листовой прокат, трубный прокат, сортовой прокат, метизная продукция - Металлсервис Уральск, Актау, Актобе

Our Branches

Uralsk

246/11 Evrazia Avenue, Uralsk, Kazakhstan, 090001

Phone\fax:

+ 7 (7112) 544-000, 543-000
+ 7 (7112) 237-503, 237-817
+ 7 (701) 767-29-84

Email:

galkin@metall-service.kzinfo@metall-service.kz

Work schedule:

Mon-Fri: 09.00-18.00h
Break from 13.00 to 14.00h

Saturday - Sunday: 09.00-13.00h

Aktobe

185B Zinchenko str, 41 siding, Aktobe

Phone\fax:

+ 7 (7132) 407-407, 407-382
+ 7 (701) 968-89-36

Email:

irina@metall-service.kz
artur@metall-service.kz

Work schedule:

Mon-Fri: 09.00-18.00
Break from 13.00 to 14.00

Saturday - Sunday: 09.00-13.00

Aktau

"Recon-Aktau" base, Industrial Zone, Aktau

Phone\fax:

+ 7 (7292) 544-445, 544-592, 550-050
+ 7 (701) 767-31-39

Email:

nikolai@metall-service.kz

Work schedule:

Mon-Fri: 09.00-18.00
Break from 13.00 to 14.00

Saturday - Sunday: 09.00-13.00

Atyrau

33 Building, South Industrial Area, Atyrau, Kazakhstan, 060000

Phone/fax:

+7 (7122) 76-33-00
+7 (7122) 76-33-76
+7 (7122) 76-36-26
+7 (7122) 76-36-96

Mob:

+7 (701) 027-28-59

Email:

kurdov@metall-service.kz sasha@metall-service.kz

Work schedule:

Mon-Fri: 09.00-18.00h
Break from 13.00 to 14.00h

Saturday - Sunday 09.00 – 13.00h

Kostanay

2/1 Karbishev str base Mansion Kostanay Kazakhstan 110000

Phone/fax:

+7 (7142) 39-40-80
+7 (7142) 39-40-88

Mob:

+7 (701) 029 08 37

Email:

galkin@metall-service.kz

Work schedule:

Mon-Fri: 09.00-18.00h
Break from 13.00 to 14.00h

Saturday - Sunday 09.00 – 13.00h

Kyzylorda

20 Hong Bin Do str.

Phone/fax:

+ 7 (7242) 259-111, 259-559, 259-577
+7 (701) 034-64-50

Email:

aset@metall-service.kz

Work shedule:

Mon-Fri: 09.00-18.00h
Break from 13.00 to 14.00h

Saturday - Sunday 09.00–13.00h

Company Handbook of metal-roll The characteristics of metal-roll Hot-rolled steel sheet

Hot-rolled steel sheet

Hot-rolled steel sheets (State Standard 19903-74)

Hot-rolled steel sheets 500 mm of width and more, is made from 0,40 up to 160 mm of thickness in sheets and from 1,2 up to 12 mm of thickness in coils.
The sheet steel is subdivided:

1.   According to the rolling accuracy up to 12 mm of thickness:
             extra accuracy
             normal accuracy

2.    According to flat surface accuracy:
             extra flat surface accuracy
             high flat surface accuracy
             improved flat surface accuracy
             normal flat surface accuracy

3.   According to the character of edge:
             unedged
             trimmed cutoff

4     According to the sizes:
            The limiting deviations of sheet products width with sheared edge, delivered in coils,
            should not exceed:
                          +2 mm - at width from 500 up to 1000 mm;
                          +5 mm - at width more than 1000 up to 1600 mm;
                          +7 mm - at width more than 1600 mm.

             With sheared edge, delivered in sheets, should not exceed:
                          +6 mm - at width up to 800 mm;
                          +10 mm - at width more than 800 mm.

             Unedged sheets should not exceed +20 mm.

             The limiting deviations of length of sheet products should not exceed:
                          +10 mm - at length of sheets up to 1500 mm;
                          +15 mm - at length of sheets more than 1500 mm.

             Made by continuous rolling mill and cut on sheets, should not exceed:
                          +15 mm - at length of sheets up to 1500 mm;
                          +10 mm - on demand of the consumer;
                          +20 mm - at length of sheets more than 1500 up to 3000 mm;
                          +25 mm - at length of sheets more than 3000 mm.

On demand of the consumer sheet products are produced with the following limiting deviations of length:
             +5 mm - at length of sheets up to 1500 mm;
             +6 mm - at length of sheets more than 1500 up to 2000 mm;
             +10 mm - at length of sheets more than 2000 up to 3000 mm
             +20 mm - at length of sheets more than 3000 mm.

The products delivered in sheets with sheared edge, should be cut off under a direct corner. Cutting camber should not diverge from the nominal size.


Weight of square meter of a sheet (State Standard 19903-74 and 19904-90)

 

Thickness S, mm

weight 1m2 of a sheet, kg

0,5

3,925

0,6

4,710

0,7

5,495

0,8

6,280

0,9

7,065

1,0

7,850

1,2

9,420

1,4

10,990

1,5

11,775

1,7

13,345

1,8

14,130

1,9

14,915

2,0

15,700

2,5

19,625

3,0

23,550

3,5

27,475

4,0

31,400

5,0

39,250

6,0

47,100

7,0

54,950

8,0

62,800

9,0

70,650

10,0

78,500

12,0

94,200

14,0

109,900

16,0

125,600

18,0

141,300

 

Thickness S, mm

weight 1m2 of a sheet, kg

20,0

157,000

22,0

172,700

25,0

196,250

30,0

235,500

35,0

274,750

40,0

314,000

45,0

353,250

50,0

392,500

55,0

431,750

60,0

471,000

65,0

510,250

70,0

549,500

75,0

588,750

80,0

628,000

90,0

706,500

100,0

785,000

110,0

863,500

120,0

942,000

130,0

1020,500

140,0

1099,000

150,0

1177,500

160,0

1256,000

170,0

1334,500

180,0

1413,000

190,0

1491,500

200,0

1570,000